Recent content by the Black Spot

Help Support Ruger Forum:

  1. T

    Some Recent Loading/Casting Pics

    i just bought a lyman single cavity for in 454190 for $10. now i need to buy a gun that will shoot this bullet!
  2. T

    .303 British loads

    is that a no.1 mk III action? if so i do not think they are as strong as a no.4 mk I action. personally i would not use 308 data unless you reduce your loads. check out the hodgdon sight. i have some of their data that list a 180 grain bullet - varget powder - 37 gr. minimum load(2300fps) and a...
  3. T

    Velocity on .44 mag load....?

    finally got some new rounds loaded up with blue dot and 2400, now if i can get to the range...
  4. T

    Li'l Gun in .44 Carbine Loads

    i have used it in the hornet 12.5 grains with a 40 sierra hp got me 3/8" groups at a hundred(3 shots) call hodgdon about the minimums and maximums for your mag loads. i do know the minimum 44 mag load with a 300 grain bullet is 16 grains of lilgun. here is the link...
  5. T

    Velocity on .44 mag load....?

    called hodgdon today. it is ok to use trail boss with the 315 grain bullet in 44 mag. max load is all the powder to where base of bullet will be seated. minimum is 30% of that max load.
  6. T

    Velocity on .44 mag load....?

    COR, no offense taken. note taken on not to mess with lilgun and filler. i have thrown out lilgun for all light loads.
  7. T

    Velocity on .44 mag load....?

    hammerdown77, i have been thinking alot about trail boss. it is only $17 a can here. should get a lot shooting per pound.
  8. T

    Velocity on .44 mag load....?

    i do appreciate all the advice. i am serious about the loads, safe loads. i have reloading manuals, including the lyman manual, alliants manual, hodgdon, hornadys load notes, sierra etcetera. i am not trying to disregard the advice on here or in the manuals. just wondering why people say don't...
  9. T

    Velocity on .44 mag load....?

    here is another source: http://www.reloadammo.com/44loads.htm
  10. T

    Velocity on .44 mag load....?

    here is where i was getting my bullseye/blue dot starting loads; http://www.handloads.com/loaddata/default.asp?Caliber=44%20Magnum&Weight=310&type=Handgun&Order=Powder&Source=Alliant i may also try 11 - 12 grains of 2400 or i may breakdown and by some trailboss or unique sorry, not trying to...
  11. T

    Velocity on .44 mag load....?

    i am going to try some more tests with around 6 grains of bullseye and about 10 grains of bluedot and see how those shoot. thanks everyone.
  12. T

    Velocity on .44 mag load....?

    the reason for the 315 grain is because i shoot this in my .444 marlin(under two inch groups at 100 yards). was looking for a good medium load with this bullet for my ruger super blackhawk, that way i only have to cast one bullet. well, i pulled all the lilgun loads and will look at...
  13. T

    Velocity on .44 mag load....?

    alright, y'all have convinced me. i would still like to know the "why" it would blow up my gun. if i was shooting above max loads i could under stand. my 315 grain bullets sits pretty far down in the case, so there is not much of an air gap. the reason for the low power load is i have arthritis...
Top