10-22 manlicher stock. Purchased used. I have fired the rifle and there are no problems.
I took it apart to clean, and I did remove the buffer pin. The bolt will not lift out from the front. It will come out if I pry with a screwdriver from the rear.
I went to a friend's house to try his bolt. My bolt will not fit in his rifle and his bolt will not fit in mine.
The problem is not the handle. After removing the handle, I tried dropping the bolt in and it hangs up on the rail. Also, my bolt is not radiused as much as my friend's.
The overhangs the rail perhaps .040".
http://i155.photobucket.com/albums/s282/hiram1818/10-22endview_zps79461588.jpg
http://i155.photobucket.com/albums/s282/hiram1818/10-22boltsideview_zpsbae8af76.jpg
http://i155.photobucket.com/albums/s282/hiram1818/10-22endview_zps79461588.jpg
Thanks for any help.
I took it apart to clean, and I did remove the buffer pin. The bolt will not lift out from the front. It will come out if I pry with a screwdriver from the rear.
I went to a friend's house to try his bolt. My bolt will not fit in his rifle and his bolt will not fit in mine.
The problem is not the handle. After removing the handle, I tried dropping the bolt in and it hangs up on the rail. Also, my bolt is not radiused as much as my friend's.
The overhangs the rail perhaps .040".
http://i155.photobucket.com/albums/s282/hiram1818/10-22endview_zps79461588.jpg
http://i155.photobucket.com/albums/s282/hiram1818/10-22boltsideview_zpsbae8af76.jpg
http://i155.photobucket.com/albums/s282/hiram1818/10-22endview_zps79461588.jpg
Thanks for any help.