Bolt strip
1. Hold bolt body firmly and rotate bolt handle clockwise to lower striker
2. Press end of shroud against firm surface while pressing out bolt pin, easy to do.
3. Shroud and spring will come off, then remove extractor spring by pulling outward on extractor and prying spring up with very small screwdriver blade, spring is then rotated off bolt freeing extractor and striker.
4. To get it back together assemble striker and bolt handle, slide onto bolt and reinstall extractor and extractor spring, hand pressure will easily do this, then align shroud with spring inside and place over bolt handle making sure striker is at bottom of cocking cam. Press end of shroud on firm surface and insert pin. Hold bolt body and rotate bolt handle counter clockwise prior to placing bolt into rifle.