Ok so took my gun out for the third time today. The day I bought it ran about 400 rounds no problem I don't think I had a single problem. Had a friend who has 3000 rounds through his sr9 show me how to break it down and clean it. Took it to the range a couple weeks ago and had some tulammo brass max I got cheap at walmart for me and my brother to shoot. Had problems right away some fail to feeds while he was shooting which I believe was him because once he tightened up his grip a bit that went away.
The gun would fire fine on first round then every couple or even every round the trigger would not reset. Pulling the slide back slightly and letting it go would reset it and this continued for 350 rounds. I figured I hadn't cleaned it well enough so I took it home took it all apart and cleaned it thoroughly. Today went to the range again with 3 different types of ball ammo and some hornady jump since this is what I carry I wanted to test some of them to be sure they fed reliably etc.
Same thing started happening on my send one shot. Shot about 40 rounds and it seemed more frequent with the extended grip magazine but it would fail to reset the trigger with both mags and all 3 types of ammo
Tulammo maxx brass, federal, and Remington. Tried one clip of the jhp and only happened 1/10 shots. Could be coincidence I'm not sure. I shot about 150 rounds of the other three combined and probably had 100 fail to resets.
My friend was there and ran a mag of each through his sr9c with out a single problem he shot mine and had the same results I was getting. In the middle somwhere we field stripped and sprayed down the trigger components and anything else we saw with clp wiped some off and tried to run the gun very wet and this changed nothing.
I guess I'll be calling ruger in the morning luckily I'm picking up my sr1911 on Thursday since the 9 is the only pistol I own I won't have a carry gun
Have any of you had this or seen this problem occur before?
The gun would fire fine on first round then every couple or even every round the trigger would not reset. Pulling the slide back slightly and letting it go would reset it and this continued for 350 rounds. I figured I hadn't cleaned it well enough so I took it home took it all apart and cleaned it thoroughly. Today went to the range again with 3 different types of ball ammo and some hornady jump since this is what I carry I wanted to test some of them to be sure they fed reliably etc.
Same thing started happening on my send one shot. Shot about 40 rounds and it seemed more frequent with the extended grip magazine but it would fail to reset the trigger with both mags and all 3 types of ammo
Tulammo maxx brass, federal, and Remington. Tried one clip of the jhp and only happened 1/10 shots. Could be coincidence I'm not sure. I shot about 150 rounds of the other three combined and probably had 100 fail to resets.
My friend was there and ran a mag of each through his sr9c with out a single problem he shot mine and had the same results I was getting. In the middle somwhere we field stripped and sprayed down the trigger components and anything else we saw with clp wiped some off and tried to run the gun very wet and this changed nothing.
I guess I'll be calling ruger in the morning luckily I'm picking up my sr1911 on Thursday since the 9 is the only pistol I own I won't have a carry gun
Have any of you had this or seen this problem occur before?