Top grip frame screws

[xtratoy]

I've been backordered for over 3 months for a pair of top grip frame screws to do a Bisley to Super Blackhawk Hunter grip frame swap. Does anyone know the size of these screws , diameter, thread size, length? Will the Allen head screws of the Bisley grip fit and not protrude from hunter grip frame?

 

[NikA]

Ruger will send you a couple screws for free. I can get you all the specifics tonight after dinner.

PS I'd be interested in your takeoff Bisley frame.

 

[NikA]

Ruger back frame screws are P/N KXR01800 (you will want to reference this, the last request I made had 2 pivot pin screws and only one back frame screw). Ruger sent me some screws last month to replace a set that someone had damaged.

#6-40 TPI screw, .442" OAL, .340" threaded, .200" head diameter, dome/oval head countersunk.

Bisley back frame screws are cap head, will not seat correctly in other Ruger grip frames. They *should* be sized correctly to enter the holes, whether they will protrude I do not know.

 

[xtratoy]

Ruger back frame screws are P/N KXR01800 (you will want to reference this, the last request I made had 2 pivot pin screws and only one back frame screw). Ruger sent me some screws last month to replace a set that someone had damaged.

#6-40 TPI screw, .442" OAL, .340" threaded, .200" head diameter, dome/oval head countersunk.

Bisley back frame screws are cap head, will not seat correctly in other Ruger grip frames. They *should* be sized correctly to enter the holes, whether they will protrude I do not know.

Thanks for the info, which customer service area to contact out of the 3 listed in accompanying picture.

 

[NikA]

Thanks for the info, which customer service area to contact out of the 3 listed in accompanying picture. View attachment 56555

I talked to Mayodan NC, I believe they handle all SA revolvers.

 

[contender]

Uhh,
Look at the phone numbers for all 3 places. It's the same number

 

[xtratoy]

My eye clued into the fax number . Sorry for the mistake. I have a serious challenge when looking for something, it can be right in front of me and be invisible to my eyes. Happens all to often. It would save me a lot of time and frustration if I wasn't afflicted with this condition. On the bright side, I often find other things I wasn't able to see at other tines.

 

[xtratoy]

NikA, I remembered that I had a bag with several small revolver parts from Midway and found 2 stainless upper grip frame screws this morning. Thanks for your help!