Ruger Pins

Help Support Ruger Forum:

Joined
Jul 13, 2002
Messages
1,872
Location
Marysville, CA USA
I've been collecting "hat" pins for a while now. I'm sure I'm missing plenty. If you happen to know of any that are not on this pin board I'd be interested in seeing what you have. Thanks.
RugerPinBoard.jpg

RugerPinboard1.jpg

RugerPinBoard2.jpg

RugerPinBoard3.jpg

RugerPinBoard4.jpg

RugerPinBoard5.jpg

I have some extra Pins to trade for others I don't have.
PinsExtra.jpg
 
Absolutly Neat!!!!! Can't help you much as to what you may be missing. I'm sure somebody will let you know! I'm sure some 'purist' will be able to tell you those that are authorized by Ruger and those that are not. personally I love 'em all. Coogs.
 
Ill dig out my batch, and shoot a few pics. I already see a few missing. Such as; an armorer school pin, the last few years the SHOT & NRA show pins look alike, but have each show marked differently on them, (2006, 2007, & 2008) so far,,,,!
 
I'm not much of a "trinkets" collector, but, once in a while this stuff "falls in my lap" :)

334401157.jpg


flatgate

PS Sorry, Gee-Dub, I only have about 1/5 of what you've got....
 
weaselmeatgravy":2m39hjbg said:
I think I spy the Armorer's School pin above the 204 Ruger pin.

How about service pins - do they count?

The 10 year is definitely a tie tack:
10-year-pin.jpg


The 25 year is Sterling and just a pin but likely meant as a tie tack:
25-year-pin.jpg
The Armorer's School Pin is above the 204 Ruger Pin. I like the 25 year pin (have not seen that one before). I'm working on getting this one.
30YearPin.jpg
 
Gary, On the bottom right you have two 50 year flattop pins. One they did for the 357 and one for the 44. There are two variations on each. One is from the NRA show and the other from the shot show. You need to look real close for us getting older with our eye sight going. But I am not getting glasses till I hit 50.....
 
Gary, The round gray pins are the ones for the 357 flattop I kept thinking they made those others in both calibers. But I looked at one box of pins and found a few different ones.

pins004-1.jpg


pins003.jpg


pins002-1.jpg


pins001.jpg

I know I have another box with pins I will have to find it and see if I find any others. I do know of some Sid Bell silver pins out there.
 
GW you dont show the Large yellow one in the center of this picture. I am pretty sure I have a couple that Rick is showing somewhere in my mess.

Dan

RSS4-128XXX.jpg
 
Ok, I missed the armorers pin mixed in with the SHOT show pins. My mistake. I think pics have been posted of any I may have so I'll not post anymore. However, I see a couple I don't have as well,,,,,!
 
Here are a couple more.

100_1230.jpg

The top middle pin is the same as the one in Rick's picture next to the boxed Armourers pins, I believe? The one on the top right is the Sid Bell pin. The two on the bottom I don't have any info. for. May be someone here does?

100_1240.jpg

The back side of the Sid Bell & small buckle pin. The buckle pin has a threaded post and says gold filled sterling.

100_1256.jpg

Here are a couple more 10 year tie tacks. The one on the right is the same as WMG's. All came with two pin backs (except the one on left) so you could use them as a tie tack or pin. The blue box was not used for these tie tacks, I put this set in it until I find an orginal box.

I believe I have a couple more that are not shown, just not sure where they are at?
 
Gary, I've thought that but all of my buckles and jewelry items have Wilson on the back. There is not a lot of room on the back of this pin though.
Thanks.
 
WMG, I received it last April off of ebay with some other pins, pens & sticker. I didn't follow up on getting any information for this pin. :( I think I'll see if I can get some information from the seller, I have there email address.
 
Redstick,

Those are very common. I don't think there's much in the way of value. I probably have half a dozen of them (6-1/2" bbl. version).

That Ruger Bird is most likely NOT FACTORY, IMHO, since the intertwined S and R letters are not at all like what the Factory uses....

OK, that's the entire extent of my knowledge of the subject at hand...

flatgate
 

Latest posts

Top