casper45, The procedure is the same for most of the P-series Ruger pistols. Once you have the gun "field stripped" with the slide off the frame, use a small jeweler's screwdriver to "flex" the extractor outward until it will move forward and out. With the safety levers in the off-safe position, use the same screwdriver with masking tape on the tip to pry the "right" safety lever outward. Keep a finger tip below the safety lever to "catch" the plunger and spring! Turn the "left" safety lever to a little past the on-safe position and remove it toward the left. Restrain the firing pin and spring as you do the "last" step as it will be released when the left safety lever comes out. That's it! Re-assembly is in the reverse direction of the above procedure..............................Dick :wink:
I want to remove the left Decock levers on my P90 and P97. I know how to get the right one off. What is the next step? I think I can put the smaller P97 right decocker on the P90, so maybe the left as well? I think the size of the P90 decock lever is overkill. I am thinking of a small P97 on the left, and one ground off on the right.