looking for a a 125 gr hollow point .38 special / .357 mold

Help Support Ruger Forum:

happy

Buckeye
Joined
Jun 18, 2005
Messages
1,453
Location
clarkstown, ny
hi , does anyone make a 125 gr hollow point .38 special / .357 magnum
bullets??

hoping for a duel bullet or more mold ,
any ideas, please post,
many thanks, happy
 

sixshot

Buckeye
Joined
Aug 20, 2006
Messages
1,835
Location
soda springs, idaho
Miha has made at least one run of his excellent 2-4 cavity 125 gr HP plain base bullet, you might check & see if he has any left over. I use it all the time in both my 9mm's & also 38's & 357 loads. Ground Squirrels hate it.

Dick
 

Chief 101

Hunter
Joined
Feb 14, 2007
Messages
2,613
Location
Idaho
I have an attachment for my old Forster case trimmer that drills a hole in loaded bullet for hollow point. It works real well but its only 1/8" hole. You set the depth to drill. You might check that out, just a thought.
 

GP100man

Buckeye
Joined
Sep 13, 2006
Messages
1,386
Location
Tabor City, NC.
Hello happy!

What are the purposes of 125gr hp ???

The cavity in front makes it hard to stabilize ,but MP has as good as they come, the rnfp-hped
I have good results with a 358477 160gr I had hped to drop a 150gr bullet & also the 358156 I had hped & the gc shank removed it drops a 145 gr bullet with my alloys very stable .

The heavies I have a NOE mold that drops a 175 gr rnfp hp or a 186 gr fp.

I realize these are heavier than what you`re looking for ,but I just see the 125 hp blowing apart if hitting anything with significantly size & speed.

Have`nt been on much work too much shoot to little.

GP
 
Top