IMI Uzi, Sig556, Ruger GPNY, GP100 3", SP101...

Help Support Ruger Forum:

MG-70

Single-Sixer
Joined
Jun 14, 2007
Messages
146
Location
Montgomery County, MARYLAND
Merging everything not sold into a different post...thanks

leisurethings AT gmail DOT com or through the forum (NO PRIVATE MESSAGES, please) for additional info., reasonable offers, etc. Can do FTF in Northern Montgomery County, MD. Items also advertised on other "forums" and subject to prior sale (first come, first served, based on email time stamp). Shipping as noted via cheapest carrier; Insurance Extra. Handguns shipped from an FFL. Payments accepted in USPS/Wells Fargo money orders and Cash; Discreet Paypal only for small items, sorry. Feel free to check feedback at Ar15.com (+93), FALfiles.com (+24), Gunbroker (+10), Rimfirecentral.com (+7), and ebay (+112; MG*70). All Laws will be obeyed.

Thanks for looking!


EVERYTHING BELOW THIS LINE IS EITHER SOLD OR SOLD PENDING FUNDS

Ruger GPNY . 38Spl (.38spl only version made for the NYPD)
4", fixed sight, stainless, double/single-action (hammer stays to the rear if cocked) GP-100 style revolver stamped "GPNY'' that was supposedly made for the New York City Police Department before they switched to autos. It was bead-blasted by Ruger when in for a tune-up in 2012 and has not been fired since. This is a not too common revolver in Excellent Condition. Includes a pair of used Pachmayr grips that were on the gun when I bought it in addition to the Ruger grips pictured. No box, but a non-original factory manual is included. Shipped to an FFL in lower 48 via USPS Insured
$450 + $30 shipping

HS Precision stock for Rem 700 SA RH. Shorter stock as used on the older VS model. Not much of a palm swell at all. Factory Varmint-weight barrel channel, aluminum bedding block, and BDL bottom metal inletting. Remington buttpad. Krylon camo job, originally black, IIRC.
$150 shipped in lower 48

HS Precision stock for Rem 700 SA RH (middle of picture); PSS type with palm swells. Barrel channel has been opened up and bedding material removed from around the action. Factory BDL bottom metal inletting and aluminum bedding block.
$240 shipped in lower 48

Factory bottom metal from a Rem 700 SPS Tactical .308, complete with action screws. The mag follower was replaced for a milled one which I prefer.
$65 shipped in lower 48

Factory bottom metal from a Rem 700 SPS Tactical .223, complete with action screws.
$65 shipped in lower 48

Burris Signature Zee 1" Medium height, with the following inserts 0, 0, +20, -20
$25 shipped Shipped in Lower 48 via USPS, Insurance Extra.

Ruger 10/22 factory 16.12" .920" hammer-forged barrel with the exterior spirals from a limited edition Talo rifle. I believe it has less than1000 rounds through it and is accurate and reliable. Excellent condition.
$125 shipped in lower 48

10/22 DSP-style factory birch stock with a barrel channel for a .920 barrel, as it came on a limited edition Talo rifle. Nice rubber buttpad. Not a very common stock. Excellent to Like New condition (I think it only went to the range once).
$80 shipped in lower 48

Weaver Grandslam 6-20X40 w/AO (Model 800470/K000327)
Black Matte Finish, Fine crosshairs, light finish wear where front ring mounts and on gold paint on the elk head drawing on top of one of the turret caps. Parallax adjustment goes down to 15 yards. Made in Japan. Excellent Condition, in worn factory box.
$300 Shipped in Lower 48 via USPS, Insurance Extra.

Ruger 10/22 Butler Creek Folding Stock for 10/22. DYI shortened and inletted for .920 barrels, including use of two-part epoxy to raise shelf on muzzle end.
$60 shipped in lower 48

Leupold QRW 30mm High rings, matte black, Excellent Condition.
$45 Shipped in Lower 48 via USPS, Insurance Extra.
(will trade for Warne Maxima 1" Medium height rings)

Uzi Model B
''Uzi Semi-auto Model B, 9mm Para, IMI – Israel" with 16" barrel, imported by Action Arms Ltd. Includes 10 surplus magazines ($100+, 9 stamped with a star), 3 surplus IMI mag pouches ($21+), surplus Israeli sling, fake short barrel, 2 new recoil buffers ($20+), magazine loader, surplus factory wood stock (I believe it's missing an L-shaped bracket and screws for mounting), and sight tool. Some paint missing from bottom of magazine well, from magazine insertion. Very Good+ condition.
$1200 + $40 shipping to Lower 48 (from a non-FFL holder)

Ruger GP-100 .357 3" half-shrouded underlug barrel, stainless
Century Arms import (badly stamped on left side of frame). Exterior has been polished. Some wear on replaceable front sight blade and a scratch on the right side of frame near the serial number. Comes with original factory grips with wood inserts in fair condition (one glued crack, panels need refinishing) and Pachmayrs currently on it. Good Condition. Shipped to an FFL in lower 48 via USPS Insured
$450 + $30

Ruger Super Blackhawk .44 Mag., Stainless, 7 1/2" Barrel
In Excellent overall condition, with factory box, papers, lock, etc. I've fired, maybe 200 rounds of factory-loaded ammunition over the years (unfortunately, I don't reload). Unaltered, with minor storage wear and a slight wiggle on the replaceable front sight blade (IIRC, it was like that when new. The flaring of the rollpin holding the sight blade should cure it). Serial Number 87-184XX +$35 Shipping from an FFL to an FFL in lower 48 via USPS Insured
$425 + $35 shipping

Hogue Overmolded stock for Rem 700 SA RH Varmint-weight barrel. New take off. Has two pillars for bedding.
$60 shipped in lower 48

Bell & Carlson Medalist Rem 700 LA RH stock, with the aluminum bedding block., with a sporter-weight barrel channel Included is a stainless steel Sunny Hill bottom metal with hinged floorplate. Material has been removed from the stock and underside of the bottom metal in an attempt to get a perfect flush fit, but due to the shape of the stock, this was not achieved (as is, the metal at the magazine sits a little lower than the stock).
$250 shipped in lower 48
 
Top