I didn't know they made these
- Thread starter martyj
- Start date
Help Support Ruger Forum:
You will be very impressed with the quality and fit of RW Gripframes. They do need a little fitting and I like to knock off the square edges, best to have a Ruger Gripframe for reference of how they "soften" some of the edges. Take your time, and expect a lot of on & off…
This is a Super Hunter grip frame, same size as the one you referenced but with the round trigger guard vs the DRAGOON Squared Guard, I like the look of the Dragoon but it busts my knuckles in the bigger calibers, thus I stick to it on the 22-32's.
Pictured here is a 50th Anniversary Flattop (44 Mag) that originally had a thinner smaller Colt size XR3, too small for me, so I Supered it. Hunter Grip Frame and added a Super Hammer.
I also followed the rear curve of the hammer, and took off the plow flair at the bottom of the back strap (straightened) to emulate the XR3.
]
This is a Super Hunter grip frame, same size as the one you referenced but with the round trigger guard vs the DRAGOON Squared Guard, I like the look of the Dragoon but it busts my knuckles in the bigger calibers, thus I stick to it on the 22-32's.
Pictured here is a 50th Anniversary Flattop (44 Mag) that originally had a thinner smaller Colt size XR3, too small for me, so I Supered it. Hunter Grip Frame and added a Super Hammer.
I also followed the rear curve of the hammer, and took off the plow flair at the bottom of the back strap (straightened) to emulate the XR3.
Last edited:
contender
Ruger Guru
Ronnie has been turning out some EXCELLENT grip frames,, as well as other parts many of us want, need, or prefer. Top quality & offerings not available from the factory.
I have a pair of his "Bradshaw Bisley" g/f's, a set of his grips, and some sights & such.
HIGHLY recommend them.
I have a pair of his "Bradshaw Bisley" g/f's, a set of his grips, and some sights & such.
HIGHLY recommend them.
I had this one done by turnbull a few years ago, and the guy in charge of my build called me and asked where I got the brass grip frame, since he was very impressed with the quality & craftsmanship. I told him RW grip frames!!
Now THAT is "awesome" looking Ruger.........
My thoughts exactly!!Now THAT is "awesome" looking Ruger.........
Ronnie makes a plethora of styles- something to fit every hand. It's because of his gripframes that I went "Ruger Crazy" a couple years back. I have about 5 of his gripframes and another 2 on the way. I really like the feel of the "Dealer", but I'm excited to see what the newest one feels like once I get it. It's a Super Blackhawk with a .300 longer grip frame and a Bisley trigger guard.
A pair of Dealers
Lee Martin XR Hybrid
Another Dealer
This one still needs to be fitted. It's a bit of a custom, not on the website. Bison Finger Groove Large w/ Bisley trigger guard.
One thing I guarantee you is that you will be amazed at the quality of what Ronnie produces. He also makes amazing hammers and triggers, and a great rear sight done with Fermin.
A pair of Dealers
Lee Martin XR Hybrid
Another Dealer
This one still needs to be fitted. It's a bit of a custom, not on the website. Bison Finger Groove Large w/ Bisley trigger guard.
One thing I guarantee you is that you will be amazed at the quality of what Ronnie produces. He also makes amazing hammers and triggers, and a great rear sight done with Fermin.
Ain't that the truth. Between my guns and my Scrambler, my spare change is never more than spare change!Sweet!!!
No wonder you have no $$ for a 4 digit flat gate
Cheers,
JAYDAWG
freakindawgen
Single-Sixer
Randyzzz
That lower gun, does it have recessed chambers? That cylinder gap is pretty tight!
That lower gun, does it have recessed chambers? That cylinder gap is pretty tight!
No, not recessed. I think it's the angle of the camera that makes it appear tighter than it is. It's a NM .44SPCL.
Bigbore5
Single-Sixer
Ronnie also builds complete full custom guns.
I helped talk him into the Biznana frame that duplicates the BFR bisley so I could use a consistent grip between the Ruger and MRI guns. But it still looked funny, so we came up with the Hager BB5 he named after me. Many of the frames are named after the creators handles from the Single Actions forum.
If you have an idea for a frame or hammer style, run it past him. He may like it. I'm waiting for the Redhawk Bisley hammer he's working on now.
I helped talk him into the Biznana frame that duplicates the BFR bisley so I could use a consistent grip between the Ruger and MRI guns. But it still looked funny, so we came up with the Hager BB5 he named after me. Many of the frames are named after the creators handles from the Single Actions forum.
If you have an idea for a frame or hammer style, run it past him. He may like it. I'm waiting for the Redhawk Bisley hammer he's working on now.
Now THAT is "awesome" looking Ruger.........
Stunning Flatgate!!!
Early 4 digit, Brass, Stag & Color….
Thank you!
It was a fun process........
A couple before and after pics.
Cheers,
JAYDAWG
....and thats what we like to see,,,,,, so much for "its got character... ",, nothing wrong with looking GOODER.......
",, nothing wrong with looking GOODER.......
....and thats what we like to see,,,,,, so much for "its got character...
Yep, I have more than a few with "character" & only a few made "GOODER"
Cheers,
JAYDAWG
Similar threads
Latest posts
-
-
-
-
Sharing a UTV vin to possible buyer on facebook market place? Do or not?
- Latest: PRichardson87
-
