Yosemite Sam
Hunter
I've got a SBHH that won't quite fully reset the trigger. After the shot the trigger returns most of the way, but is still held back slightly from it's "home" position. If I lightly draw or even just touch the hammer the trigger returns fully forward.
I'm pretty sure it's not the trigger return spring, as I get the same results with one leg off the stud or installed correctly. It's almost as if there's tension on the mechanism, or a burr.
Any ideas what area(s) to look at?
-- Sam
I'm pretty sure it's not the trigger return spring, as I get the same results with one leg off the stud or installed correctly. It's almost as if there's tension on the mechanism, or a burr.
Any ideas what area(s) to look at?
-- Sam