35 Remington Brass and Dies Found alll but bullets

Help Support Ruger Forum:

Stumps13

Single-Sixer
Joined
Feb 13, 2009
Messages
444
I have been sent on a mission to find 35 Remington components.
Any help for the following would greatly appreciated.

1. 35 Remington Brass either new or once fired

2. 35 Remington Die set new or used

3. 180 gr FLAT NOSE bullets

Thank you ion advance.
Stumps
 

Chuck 100 yd

Hunter
Joined
Mar 20, 2010
Messages
3,251
When I was searching for .35 Rem. brass, I found it on eBay. Dies are available new. You may have a little problem finding bullets though. Good luck.
 

Jimbo357mag

Hawkeye
Joined
Feb 22, 2007
Messages
10,103
You can use 180gr 357mag bullets in the 35 Remington. The Hornady 180gr XTP or similar would work well I think.

http://www.midwayusa.com/product/552814/hornady-xtp-bullets-38-caliber-357-diameter-180-grain-jacketed-hollow-point-box-of-100

http://www.midwayusa.com/product/1988218433/cast-performance-bullets-38-caliber-358-diameter-180-grain-lead-wide-flat-nose-gas-check

http://www.midwayusa.com/product/185446/sierra-tournamentmaster-bullets-38-caliber-357-diameter-180-grain-full-profile-jacket-box-of-100

http://www.midwayusa.com/product/424229/hunters-supply-hard-cast-bullets-35-remington-35-whelen-358-diameter-190-grain-lead-flat-nose

35 Remington dies.

http://www.midwayusa.com/find?sortby=1&itemsperpage=20&newcategorydimensionid=11982

35 Remington Brass.

http://www.midwayusa.com/find?sortby=1&itemsperpage=20&newcategorydimensionid=20208
 

sandman228

Single-Sixer
Joined
Sep 15, 2011
Messages
191
dies are available new at midway .you might get lucky and find a used set for a lower price on e bay .ive also bought brass from midway but its not cheap . I got lucky and came across a few hundred once fired at a good price on a local classified .as for the 180 gr flat nosed bullets your looking for I know speer makes or used to make them . I came across some at a local gunshop a while back as new old stock they were sitting on his shelf since the 1990's when I saw he only wanted 17$ per box I bought all 3 boxes he had . i use them sparingly ,for a plinking load I cast a .358 195 gr lrn bullet from a lyman mold and load it over herco powder ,its a fun plinker . I also wanted to mention ive never tried this myself but ive heard of guys resizing/reforming 308 brass into 35 rem . I don't know what all is involved in it though
 

djw54

Single-Sixer
Joined
Dec 27, 2007
Messages
376
I see the bullets and dies questions addressed above, I just purchased same from Midway also.
For brass, there's a gent over on castboolits that does form 35 Rem from 308, at a very reasonable price, esp since 35 Rem brass is rare and expensive. Good looking brass, haven't loaded any yet though.
The only hiccup in using this brass is that you need a 308 shell holder, as the rim dimensions are slightly different.
 

langenc

Single-Sixer
Joined
Aug 22, 2007
Messages
412
Anyone want to swap some 35 Remington brass, pickups, for 44 Magnums??

Im not sure how many 35s I have. Ill check the loading shed next time Im out that way. Id guess at least 50..

Rearranged some brass today--about 75, 35 Rem cases.

Have some 338 Mag, 350 Rem Mag and lots of several 7mm Mag calibers. Could get rid of all of em. What do you need?
 

langenc

Single-Sixer
Joined
Aug 22, 2007
Messages
412
If the one shooter that contacted me would email I think we can do a deal. I replied but the reply cant be delivered..
 

Latest posts

Top