9mm Officer Recoil Spring Questions

Help Support Ruger Forum:

Bob C

Bearcat
Joined
Sep 29, 2000
Messages
19
Location
Missouri
1911Tuner, I had some problems with 3-4% of rounds entering chamber, but hanging up on the top of the chamber. This occurred with different loads and different magazines. After tuning the extractor,and LIGHTLY polishing the chamber. the problem now seems to be resolved.

I would still like to have a source for recoil springs for the pistol.
 

45flattop

Single-Sixer
Joined
May 8, 2005
Messages
392
Location
Jackson, MS USA
Bob C said:
1911Tuner, I had some problems with 3-4% of rounds entering chamber, but hanging up on the top of the chamber. This occurred with different loads and different magazines. After tuning the extractor,and LIGHTLY polishing the chamber. the problem now seems to be resolved.

I would still like to have a source for recoil springs for the pistol.

Bob, these people should have every weight you can imagine for any 1911
whoever made it.

https://www.gunsprings.com/
 

Bob C

Bearcat
Joined
Sep 29, 2000
Messages
19
Location
Missouri
I checked Wolff's website earlier. They don't list anything for a 9mm Officer's Model 1911.
 

45flattop

Single-Sixer
Joined
May 8, 2005
Messages
392
Location
Jackson, MS USA
I didn't realize you needed one for a 9mm, I thought that Wolff would have
offered them anyway. Have you looked on Brownell's website, with the tons
of stuff they stock, they should have something I would think.
 
Top