Jason280_2
Single-Sixer
I've been looking at an interesting Ruger build, and wanted to see if anyone could provide any information. It started as an early '80s Super Blackhawk .44 Mag, but was converted over to .45 Colt at some point. Barrel was swapped out with a 5.5", with integral front sight/band. Base pin has a set screw, and ejector rod housing looks untouched. Here are the odd things about the revolver, the "Ruger" markings have been remived, and restamped "Ruger USA". The barrel is marked JRH .45 Colt, but I have spoken with JRH, and its absolutely not a revolver he built.
Lockup is tight, with a really good trigger pull. I *believe* it's had an action job, and has the free spin pawl swapped (cylinder spins both directions). Anybody the work look familiar, or anything else stand out about the gun?
Lockup is tight, with a really good trigger pull. I *believe* it's had an action job, and has the free spin pawl swapped (cylinder spins both directions). Anybody the work look familiar, or anything else stand out about the gun?