George
Blackhawk
I have Colt officers model series 80 model IV three and a half inch barrel in stainless steel. Got a question about the barrel link. I'd like to remove the barrel ink and replace it . I picked up a set and I'm going to try to go 5 thousands of an inch under the stock link or just replaced stock size and I'll see if that helps gun. It is hitching sticking open when trying to go into battery when gun is not loaded tilted to the left or pointed down. Gun is stainless steel . I have a sister to that gun within two years of manufacture and that gun function smoothly no matter what. Question is do I remove link pin from right to left, left to right or does it matter? Do they tend to be tough to get out? Thanks! George