Recent content by shc4life580

Never even took that into consideration, definitely need to fill it in or use a spacer, thanks. Wow a few days on this forum has paid off tremendously. Any suggestions to make the safety button a little bigger/longer, so it's easier to engage/disengage with the thicker wood grips? What about...

I've got Hogue wood MKII grips on my 79' MKI with the A100 stamp on the receiver, they fit fine, only gripes are that the safety is a little hard to flip up because the grips are a little thicker than the plastic ones so the button is basically flush with them and there is a cut out on the top...

Rugerguy, thanks, I managed to find a guy on another forum that had the VQ target hammer for $25 shipped, which is awesome seeing as on average its $45 plus shipping at all the online sites. I figured I'd give it a try since I already installed the VQ sear. I'll keep you posted though, as...

I replaced the sear, my next guess was the hammer, mainly because just about everything else has been replaced, the only other option was the disconnector and i observed the action with the barreled receiver off and it disengaged the sear and hammer fine, as you said rugerguy the problems seems...

Hi, I'm new to the forum, but after reading through several posts, I figure this has to be the place to get an answer. I've got a Ruger MKI thats acting funny. After I chamber a round and fire, it won't cock the hammer back after ejecting the casing and chambering the next round, I have to...