Recent content by cherokeetracker

Help Support Ruger Forum:

  1. C

    WTS FREEDOM ARMS 454 M 83 PREMIER GRADE***REDUCED TO $2200

    Let's hear the story on the grips... Looks like it might be interesting.
  2. C

    Flash Suppressed powders

    AA2 and W231 both have flash suppressed
  3. C

    Coated bullets compared to jacketed

    I have to X2 on this,,,, I do like my 335gr GC powder coated for my 45 ruger only loads Running 1200fps ,,, so not sure if a GC helps or not. But it hasn’t hurt. Charles
  4. C

    Federal gets into Lever gun Ammo

    That sounds good for the 357,,,, I have said the 357 belongs in a good carbine or lever rifle. Be interesting to see the 327 in some action. We have some small hill country deer, and I have thought with the right combo of bullet weight, and bullet, and especially in a rifle, it could be quick...
  5. C

    500 JRH ON BFR FRAME — light loads for whitetail

    If your gun needs glasses then try an ultra-dot you will be surprised how much better things will be. Get the Gen 2 with a 2MOA dot Use a 400gr or a 440gr cast lead with 10grs of W231 If that is tooo much then drop back to a smaller caliber.
  6. C

    SOLD

    PM sent
  7. C

    GOT IT! WTB Steel (blued) takeoff ruger birdshead grip frame

    I have a large frame blue. Pm sent
  8. C

    Nosler partition reduced load

    The 260 compact as you call it,,,, What twist rate? 1-9? I am thinking a Remington ? 1-8 works far much better !!! Big Green's mistake. I have a Mod 7 with a 18" barrel in the 260 and use the 140 gr Partitions with RE 19 slightly compressed load from the Nosler handbook. I can shoot three...
  9. C

    Ruger BH and Single Six Grips for sale

    Pearl Grips still for sale. Price reduction to 25.00 Pm with Email address for photos.
  10. C

    Ruger BH and Single Six Grips for sale

    Thanks NoDak quick and smooth transaction. Thanks Trooper Glenn for quick and smooth transaction.
  11. C

    Lefties aren't American

    Good points here from all of you. The left hand version in certain guns has always been difficult. Not only because of the variations but also of designs. In shotguns this is very important and was addressed from Browning, by making the spent cases discharge from the bottom. Although there are a...
  12. C

    FS: Ruger Old Model Single Six 22 Mag Cylinder

    Thanks for the overall Length. If you could also post the measurement from the face of the boss to the cylinder that will help greatly and should help with any questions weather the cylinder would fit existing window, without any Smith work. Measurement should be in neighborhood of .125 or...
  13. C

    For Sale 6.5 7.5 Ruger Blackhawk Practical holsters

    Left hand or right hand Holsters Crossdraw or Strongside?
Top