Help Support Ruger Forum:
BadMatrix
- Messages
- 93
- Reaction score
- 38
Latest activity Postings Media About Post areas
-
-
Get a new unfired, un-sized case. Check the length. Seat a bullet short of the lands. If it is hard to chamber and extract you have a... -
BadMatrix replied to the thread 1977 M77 220swift.What was the issue you encountered?
-
BadMatrix replied to the thread 1977 M77 220swift.Yeah, the comparator with the anvil. I have one for each caliber I reload. I was talking about a case gauge which I also have for each...
-
BadMatrix replied to the thread 1977 M77 220swift.Neck bushing, you mean a case gauge? What a headache. SAAMI headspace is 1.8006-1.8016". I have a target value of 1.8011" but it seems...
-
BadMatrix replied to the thread 1977 M77 220swift.Three. It's not the rifle. I disassembled the bolt, looked for obvious issues and lubed last year. DUH….. I put the rifle in the vice...
-
-
-
I have ONE Swift, a re-barreled 98 Mauser. I used it for a while but decided the very slight advantage it gave over a 22/250 wasn't...
-
Logically, there can only be two causes of your problem. First, it can be your rifle. If it is a factory Ruger rifle you can rule out...
-
BadMatrix replied to the thread 1977 M77 220swift.That’s a no and no.
-
BadMatrix replied to the thread 1977 M77 220swift.Absolutely spot on with rearward force….fast, they eject, slow they just fall back into the action. Next two issues will be bolt and...
-
IIRC the M77 is a Mauser type ejector. The force applied pulling the bolt rearward will affect the ejection of the fired case. Haul it...
-
BadMatrix replied to the thread 1977 M77 220swift.I was coming back to make a post when I found this post I made on the very same topic last year. Here is the new issue. Same as the...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
