RugerForum.com

This is a Ruger Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent Sturm Ruger & Company Inc. of Southport, CT.
It is currently Sat Sep 20, 2014 4:00 pm

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: SR9 after market parts
PostPosted: Tue Oct 13, 2009 9:37 pm 
Offline
Bearcat

Joined: Wed Oct 07, 2009 6:39 pm
Posts: 19
I am looking for a few places online that I can purchase any upgraded parts for my SR9. I would appreciate any help that any-one can give me.

Thank You

_________________
Bring it on


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 14, 2009 7:35 am 
Offline
Hunter

Joined: Sat Jul 14, 2007 1:01 am
Posts: 3110
Location: Lufkin, TX
There isn't much out there for 'upgrades', yet. Ghost Inc. is coming out with a trigger bar upgrade to lower the trigger pull down to a favorable 3.5 lbs and 5 lbs....2 options to choose from IIRC.

Other than that there is a few options for Sights, mainly a Tru-Glow option, but rear only I believe...I have no experience with it personally but others here can chime in on it, I've read good things though.

Any laser/light combination fit for the rail of a pistol should work just fine. I don't have one/use one, others can chime in as well, there's quite a few options for that.

Josh


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 14, 2009 8:14 am 
Offline
Bearcat
User avatar

Joined: Tue Oct 13, 2009 12:35 pm
Posts: 91
Location: Minnesota
What kind of upgrade are you looking for? Cosmetically there aren't many. Maybe if we knew what you were thinking we could be more help..........

RCG

_________________
.....its that you shoot
I thought changed was like....I don't know 72 cents. Not 12 Trillion dollars!!!!!


Top
 Profile  
 
 Post subject: Aftermarket Parts
PostPosted: Wed Oct 14, 2009 9:03 am 
Offline
Bearcat

Joined: Wed Oct 07, 2009 6:39 pm
Posts: 19
Things I am looking for:
Spring kits
Guide rod assemblies
Sights (I found - HighViz, TruGlow, WilliamsSights)
Extended Mag release
Firing pin replacement
Striker spring, cup and shaft replacements
Upgraded trigger bar
And any other aftermarket parts that can get the 25 lbs trigger to 3-5 lbs
:shock:

_________________
Bring it on


Top
 Profile  
 
 Post subject: Re: Aftermarket Parts
PostPosted: Wed Oct 14, 2009 9:22 am 
Offline
Hunter

Joined: Sat Jul 14, 2007 1:01 am
Posts: 3110
Location: Lufkin, TX
Spring kits - Ruger or on your own, and at your own risk.
Guide rod assemblies - Other than from Ruger, none known.
Sights (I found - HighViz, TruGlow, WilliamsSights)
Extended Mag release - None known, but you could have one made.
Firing pin replacement - Stock Replacement - Ruger. Aftermarket, none known, no knowledge of intentions to have one made aftermarket.
Striker spring, cup and shaft replacements - Ruger.
Upgraded trigger bar Ghost Inc, product not yet released, but in the final stages
And any other aftermarket parts that can get the 25 lbs trigger to 3-5 lbs
:shock: See Upgraded Trigger Bar

Josh


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 14, 2009 7:22 pm 
Offline
Single-Sixer

Joined: Sun May 24, 2009 10:33 am
Posts: 164
Location: Aville NC
We are currently working on several of the products you mentioned here. We have finalized the mag extensions in a +2 and a +6 setup. We are in the prototyping stage of a mag well. Also on the drawing board is new solid guide rods made in aluminum and tungsten, extended mag release is on the table but not sure of interest. Are you looking for a simple extended mag button or a extended swept back style.
Give me some input and I'll put it on the table.
We hope to have the mag extensions and mag well on the market by years end.
We will have a website up as soon as the legal stuff is done separating this part of the company from our primary business. I'd also like to add that all of our products will be made 100% in the USA.

_________________
SR9 SR40 and SR9c/40c performance parts source
LC9 performance parts source
www.gallowayprecision.com
eric@gallowayprecision.com


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 18, 2009 2:19 pm 
Offline
Bearcat

Joined: Sun Aug 30, 2009 5:47 pm
Posts: 29
Location: speedway,indianapolis,in
i would really like to see the tungsten guide rod and extended mag release (tungsten also :) ) and maybe a extended slide stop. lookn forward to those mag extensions by the way :D


Top
 Profile  
 
 Post subject:
PostPosted: Sun Oct 18, 2009 8:07 pm 
Offline
Bearcat

Joined: Wed Oct 07, 2009 6:39 pm
Posts: 19
coldarkstare wrote:
i would really like to see the tungsten guide rod and extended mag release (tungsten also :) ) and maybe a extended slide stop. :D


As my list states, I am looking for all those parts. There is no-one out there that supplies these parts.

_________________
Bring it on


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 19, 2009 4:14 pm 
Offline
Bearcat

Joined: Sun Aug 30, 2009 5:47 pm
Posts: 29
Location: speedway,indianapolis,in
gommee wrote:
coldarkstare wrote:
i would really like to see the tungsten guide rod and extended mag release (tungsten also :) ) and maybe a extended slide stop. :D


As my list states, I am looking for all those parts. There is no-one out there that supplies these parts.
this was meant to be a quote to Egalloway(my bad ) but im glad to see there is others lookn for the same products which will create a demand :D in which egalloway is workn to provide.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Oct 19, 2009 6:05 pm 
Offline
Bearcat

Joined: Wed Oct 07, 2009 6:39 pm
Posts: 19
coldarkstare wrote:
gommee wrote:
coldarkstare wrote:
i would really like to see the tungsten guide rod and extended mag release (tungsten also :) ) and maybe a extended slide stop. :D


As my list states, I am looking for all those parts. There is no-one out there that supplies these parts.


this was meant to be a quote to Egalloway(my bad ) but im glad to see there is others lookn for the same products which will create a demand :D in which egalloway is workn to provide.


The more people that show interest, the more demand, the more likely it will be worth producing. Sorry if I stole your Thunder... :wink:

_________________
Bring it on


Top
 Profile  
 
 Post subject:
PostPosted: Tue Oct 20, 2009 4:23 pm 
Offline
Single-Sixer

Joined: Sun May 24, 2009 10:33 am
Posts: 164
Location: Aville NC
The guide rod on the list. Got to see the solid model of the mag well. It's coming along nicely. Should have the protos shortly. We have started looking into guide rod using a floating bushing. Should be moving along on it next.

_________________
SR9 SR40 and SR9c/40c performance parts source
LC9 performance parts source
www.gallowayprecision.com
eric@gallowayprecision.com


Top
 Profile  
 
 Post subject:
PostPosted: Sat Oct 24, 2009 6:34 pm 
Offline
Bearcat
User avatar

Joined: Tue Apr 14, 2009 3:24 pm
Posts: 10
Sign me up for everything! For anyone interested the Streamlight TLR-2 light/laser works very nice on this model. Unfortunately, the muzzle flash burns the finish off the top of the light, so I had to cover it with a vinyl slip on cap for range action.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 7 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group