RugerForum.com • View topic

View unanswered posts | View active topics

Board index » Main » Ruger Semiauto Pistols

All times are UTC - 7 hours [ DST ]

P95 Decocker

Moderators: flatgate, Moderators

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

LightnerZ

Post subject: P95 Decocker

Posted: Mon Jan 11, 2010 2:49 pm

Bearcat

Joined: Tue Dec 15, 2009 10:33 am
Posts: 9
Location: Fort Wayne, IN

Ok this has probably been discussed many times before and will definitely show my ignorance but I bought a P95 a month or so ago and I'm not sure what is meant by a decocker. How can I tell if my P95 is a decocker or not. Be gentle. I'm new to guns and am a little depressed by the fact that I've had it for over a month and due to injury and illness haven't been out to shoot yet.

Top

timjo1955a

Post subject:

Posted: Mon Jan 11, 2010 3:17 pm

Buckeye

Joined: Fri Apr 15, 2005 1:01 am
Posts: 1535
Location: WV

There is a difference in the purpose of the lever at the rear of the slide in the decocker only vs. manual safety models. The decocker model's lever will decock the pistol, then automatically flip back up into the firing position. The manual safety model's lever does not flip back up automatically- it acts as both a decocker and safety.
The manual safety model has S with white dot and F with red dot etched in the frame and the lever is wider.

Top

LightnerZ

Post subject:

Posted: Mon Jan 11, 2010 3:18 pm

Bearcat

Joined: Tue Dec 15, 2009 10:33 am
Posts: 9
Location: Fort Wayne, IN

Thanks timjo1955a

That helps.

Top

blume357

Post subject:

Posted: Mon Jan 11, 2010 4:38 pm

Hawkeye

Joined: Tue Nov 15, 2005 2:01 am
Posts: 13526
Location: Greenville, SC: USA

Does it have a little red dot on the left side that the lever when flipped down covers up? If so, it's a safety model... if no dot and the lever will not stay down but flips back up when pushed down ... it's a decocker.... either way you need to get out and shoot it.

Top

buckshotshorty

Post subject:

Posted: Mon Jan 11, 2010 8:29 pm

Single-Sixer

Joined: Mon Mar 10, 2008 2:57 pm
Posts: 423

Decocker models stopped being produced in 2007. So, unless your gun is new/old stock or designated P95DC, it is not a decocker only model.

_________________
Too light for heavy work; too heavy for light work!

pb

Top

cce1302

Post subject:

Posted: Tue Jan 12, 2010 8:00 pm

Bearcat

Joined: Sat Jan 09, 2010 8:04 pm
Posts: 15

hittman wrote:

and P95DC on the model number......you'd only know that of course if you bought it new or got the box with it......

I had the same questions too.....local guys "warned" me that the de-cocker model doesn't have a safety.......which would be just like a revolver so, no worries

My P95DC says "P95DC" on the slide, as well. It makes it easy to identify when I can't find the box. :wink:

Top

railroader

Post subject:

Posted: Wed Jan 13, 2010 8:07 am

Single-Sixer

Joined: Sun May 10, 2009 11:00 am
Posts: 162

The top gun is a decocker. The bottom one is a decocker/safety model. The decocker model decocks and is ready to fire. The safety model you decock but then you must push the safety up to fire.

Top

aware

Post subject:

Posted: Mon Jan 18, 2010 6:15 pm

Bearcat

Joined: Mon Jan 18, 2010 6:10 pm
Posts: 2
Location: Houston

I am glad I found this thread since I am in the market for a P345 or a P90. My only familiarity with semi-auto pistols is wit the Sig line of pistols--I love the simplicity of just having a decocker. So here is my question, is the firing pin on the current P345 or P90 in any different position or state with the safety in the "fire" position than it is/was with just the decocker?

I hope you understand my meaning.

Austin

Top

Page 1 of 1

[ 8 posts ]

Board index » Main » Ruger Semiauto Pistols

All times are UTC - 7 hours [ DST ]

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to: