Project Update

Hey Guys,
I thought it was about time to update the Cub project. Son, and Grandson have been spending quite a bit of time at our house working on the Cub with me.
Grandson graduated from Texas A&M on Dec 14 now he will have more time to help out. As some of you might know Son retired in July after 28 1/2 years in the Navy.
Anyway here are a few pictures of the Cub.
Take care,
Jim

The Fuselage will get two more strips on it. A blue and a red which are stick on ones from the factory.




Not a typical Cub Panel



Nothing smoked when the power was turned on.




We are about ready to put this on.


Painter hard at it :wink:

always good to see a project going well, thanks for the photos

as for the wiring and power up...there look to be a LOT of loose ends!

JFB said:

always good to see a project going well, thanks for the photos

as for the wiring and power up...there look to be a LOT of loose ends!

Click to expand...

Thanks so much.
Yes a lot of lose ends. A lot of what you see connect to wires in the wings and thru the firewall to the engine. Breakers were pulled and switches turned off. Then we checked to make sure the electrons were flowing to the right places All is good, main check out was the big screen in the panel and other radios.

Coming along! Patience will get you where you want to go. Besides your help is good!
gramps