JFB
Hunter
My SBH case
I picked up a wooden case that a Super Blackhawk would fit. Thanks WeasleMeatGravy!
The case actually appears to be for a Colt 45, in that the cartridge holes allowed 44 mags to rattle around.
The first improvement to this case was to sleeve the cartridge holes. K&S ½" OD brass tubing fit the case and 44 mag cartridges. The tube was cut into 1.2" segments (thus getting 10 pieces with no waste). When tapped in, the tubes were slightly proud.
Next was to use the replace the steel looped cleaning rod with a brass one from Dewey along with jag, mop and brush.
So now my SBH has a case
And the "Piece de Resistance", the lid was laser engraved with the Sturm Ruger Logo and a SBH banner.
I picked up a wooden case that a Super Blackhawk would fit. Thanks WeasleMeatGravy!
The case actually appears to be for a Colt 45, in that the cartridge holes allowed 44 mags to rattle around.
The first improvement to this case was to sleeve the cartridge holes. K&S ½" OD brass tubing fit the case and 44 mag cartridges. The tube was cut into 1.2" segments (thus getting 10 pieces with no waste). When tapped in, the tubes were slightly proud.
Next was to use the replace the steel looped cleaning rod with a brass one from Dewey along with jag, mop and brush.
So now my SBH has a case
And the "Piece de Resistance", the lid was laser engraved with the Sturm Ruger Logo and a SBH banner.