BIG man belts and misc.

Here's some BIG man belts and holsters, I've lost weight due to an injury and P/T and I'm still taking it off! These belts are in the upper 40" to lower 50" range.

First up is an EPS (YES, El Paso Saddlery!) floral belt and holster rig! This is for a Colt Python. Has a cartridge slide instead of belt loops. Holster is a Tom Threepersons' rig (My grandfather actually rode with the Canadian Tom Threepersons in the 1918 Calgary Stampede and maybe the Pendleton Round-up). This rig would cost about $400 dollars new! My price is only $200 SHIPPED! If it is too big, a good leatherworker can shorten it fairly economically!

https://ibb.co/ryPS04j

https://ibb.co/0mXhBPB

Second up is also an EPS tooled belt. This one is for a Colt SAA. It has 45 cal cartridge loops (What Else!). Same size (~50"). Also a Tom Threepersons rig. Think of walking into the neighbor's BBQ with this on!

https://ibb.co/NmfGjRB
https://ibb.co/zFfQBFC
https://ibb.co/zFfQBFC
Here's a pic of it with my pearl (real) handled, nickle plated 41 LC.

https://ibb.co/fNZg5F

Also, have a buckle that would look REAL good with either of the first two belt at a BBQ!
https://ibb.co/LhvdRvc

Also, a tooled holster and belt in the ever popular basketweave. Made by "D.F. (or D.R.) Rowland, Camp Verde, AZ" I also have a Tom Threepersons CROSSDRAW that is in basketweave and ALMOST matches in color (slightly darker).
This Holster is $120 dollars and $50 for the crossdraw. I will re-dye it and the crossdraw for an additional $120 dollars and recommend an oxblood coloration or black!.
https://ibb.co/gTZJvs6

Lastly, a used but not abused, basic holster. Wore this when I was guiding on wild boar during grad school in Cali. Holster is a Lawrence #120 and the belt is a Bianchi marked "44" (Too small now). Cartridge loops are marked 44/45 but fit a 41 mag better. This one gave me a lot of years and will give someone many moor! Only $70 SHIPPED!

https://ibb.co/DGkN5NT
https://ibb.co/DGkN5NT

Remember, ALL PRICES INCLUDE SHIPPING> REASONABLE OFFERS CONSIDERED!

Price on 2nd one, or did I miss it?

Sorry, I thought I said it was the same as the first one. My mistake!

What gun fits the last holster?

Colt SAA, I carried a Blackhawk in it (Old Model) and I think a K frame will work!

5.5" Colt/ Ruger?

THAT holster DOES NOT fit a 5 1/2 " Ruger (A Reeder custom Super Blackhawk). However, I have a Classic Old West Style Threepersons holster (unlined) that fits my 5 1/2" Super Blackhawk and a used (about the same condition as the one pictured) Bianchi 1L (lined) that fits my 5 1/2 " Super (it's tight for the Super but fits my OM Blackhawk well). I can switch any of the three holsters for the same price.