Flattop Bisley Convertible .357/9mm

Is there such a beast?

I couldn't find one referenced in the RENE Guide.

Yes they do make it! http://www.prophetriver.com here in Canada has three in stock at the moment...

I see Flattop .357/9mm and Bisley Flattop .44 Spcls but don't see a Bisley Flattop .357/9mm on their site

pacecars said:

Is there such a beast?

Click to expand...

Not to my knowledge...or I would own one?

You are right sir,...I read it wrong! 44 spl built on 357 frame....
I do apologize for misleading you...

Now it gets me thinking about getting one! :lol:

No problem. I am looking for a base gun to have made into a 10mm/.38-40 convertible but I want a Flattop Bisley in blue. It would be cheaper if they made this but oh well

If you start with a standard Model 38/357 convertible and switch to a Bisley grip, hammer and trigger which are available as take offs.

Or start with a 44 Spl Bisley; the cyl and barrel are in demand for converting old model 357s to 44 Spl. You could sell or trade and probably come out even.

You can look for used New Vaquero and Flat Top 357 cyls and barrel take offs which show up from time to time on the auctions.

I also get Ruger take off barrels and cyls from Custom pistol smiths like:

John Linebaugh - Linebaugh Custom Sixguns
Phone: 307-645-3332
P.O. Box 455
Cody, WY 82414
Delivery (UPS):
177 Louis L'Amour Lane
Powell, WY 82435
http://www.customsixguns.com/index.htm


Where there's a will, there's a way!

Sounds like a great combination. They do make a 357 New Vaquero with a Bisley grip frame. Although it doesn't have a flat top with adjustable sights.

Lipsey's made the .357/9mm convertible flattop in blue and stainless with 4-5/8" or 5-1/2" barrels with the normal XR3 grip frame. They didn't do any Bisleys.
Chet15

Yep. Going to go with a Flattop .357/9mm convertible in blue and have a Bisley grip frame installed, new 5 inch barrel with a Fermin Garza front sight, steel ERH, rechamber it to .38-40/10mm, case harden the frame, trigger and hammer and rust blue the rest, and finally some fancy Walnut grips

Sounds excellent! A great medium frame package.

My only additional thought is that the flat top medium frame will not have the strength for the full potential of the .38-40, a.k.a., the .40 WCF Magnum.

A 41 or 44 Mag NM large frame flat top would be. Of course that doesn't matter if you're not looking for mega performance.

1983 vintage NM 357 large frame converted to 38-40; with steel ejector housing and grip frame:

https://ruger.com/products/newModelBlackhawkConvertible/models.html


https://www.gunsamerica.com/937241792/Ruger-Blackhawk-Convertible-357mag-9mm-4-625-6-Round-Used-6750.htm

https://grabagun.com/ruger-blackhawk-conv-357-9mm-6-5-bl.html