RugerForum.com

This is a Ruger Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent Sturm Ruger & Company Inc. of Southport, CT.
It is currently Thu Sep 19, 2019 5:25 pm

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Tue Jul 30, 2019 8:05 pm 
Bearcat

Joined: Thu Dec 29, 2016 8:26 am
Posts: 83
I checked the Ruger website and did not see the answer, but is it possible to buy a .45 acp cylinder and just drop it in as if the revolver was originally a convertible?

Any design differences that would prevent this?

Where find cylinders?

Many thanks.


Top
 Profile  
 
PostPosted: Tue Jul 30, 2019 8:24 pm 
Moderator
User avatar

Joined: Wed Jan 16, 2008 10:26 pm
Posts: 8641
Location: Illinois
Yes its possible. I've done it with a Single Six and the new-to-me cylinder dropped right it and worked fine.

Measure your current factory cylinder length and look for one that size or a tad longer.

Put a WTB ad in the Classified Section here.


Top
 Profile  
 
PostPosted: Tue Jul 30, 2019 8:25 pm 
Buckeye

Joined: Wed Oct 27, 2004 1:01 am
Posts: 1192
Location: Southwest VA USA
Sometimes, Ruger will fit your revolver with an additional cylinder. Other times, they won't.

I have bought an Old Model 9mm cylinder that dropped into my 3 digit flattop .357 Blackhawk. I also bought an additional .22 Long Rifle Bearcat cylinder that dropped into my revolver without requiring any fitting. That one got reamed to .22 magnum.


Last edited by Muley Gil on Wed Jul 31, 2019 9:14 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Jul 31, 2019 10:26 am 
Bearcat

Joined: Thu Apr 06, 2017 4:24 pm
Posts: 33
The best bet is to call Ruger customer service, fitting a .45ACP cylinder to a .45Colt should not be a problem.


Top
 Profile  
 
PostPosted: Wed Jul 31, 2019 7:11 pm 
Hawkeye

Joined: Thu Jun 24, 2004 1:01 am
Posts: 9688
Location: Memphis, TN USA
Ruger has had an on-again, off-again policy on this. Last I heard, they would not fit an auxiliary cylinder to revolver that was not originally sold as a convertible.

At one time, Ruger did not offer convertibles, but would fit an auxiliary cylinder. I have two .45 Colts that were bought as such, and they did retrofit ACP cylinders for both.

Bob Wright


Last edited by Bob Wright on Thu Aug 01, 2019 10:12 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu Aug 01, 2019 8:14 am 
Hunter

Joined: Sat Dec 16, 2006 2:01 am
Posts: 2056
Location: MN, USA
Been there, done it. You need to get a cylinder the same length, or slightly longer than your 45 Colt cylinder as there are variations. I had to take a few thou's off the front bearing surface of my ACP cylinder to fit. Worked as if it came that way.


Top
 Profile  
 
PostPosted: Fri Aug 16, 2019 3:17 pm 
Single-Sixer

Joined: Mon Jan 02, 2017 10:21 am
Posts: 216
Location: New Mexico
I have 2 .45 Blackhawks, one a convertible and one LC only, both New Model. The ACP cylinder does not work in the other gun. It drops in and seems to fit fine, will fire 1 shot then lock up tight. Have to remove the cylinder at that point. I'm not saying you can't find a drop-in cylinder that will work, just that even if it does drop right in, it still may not work properly.


Top
 Profile  
 
PostPosted: Sat Aug 24, 2019 11:06 am 
Buckeye

Joined: Thu Mar 26, 2009 7:16 pm
Posts: 1073
I have also seen just the cylinders at various gun shows from time to time. Measure carefully and then test carefully. When I called Ruger back around 2003 or so they said they would not fit an extra cylinder unless the revolver was initially made as a convertible but I think it would be worth a call now to check if you are interested in having them do it.

_________________
NRA Life member


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group