RugerForum.com

This is a Ruger Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent Sturm Ruger & Company Inc. of Southport, CT.
It is currently Sat Oct 16, 2021 3:18 am

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Sat Sep 25, 2021 6:02 am 
Buckeye

Joined: Sun Dec 17, 2000 2:01 am
Posts: 1165
Looking for conversion parts/kit (grip frame, hammer, trigger, back screws) to convert NMBH, large frame, blue, to Bisley. Hammer and trigger could be stainless, but frame should be standard steel alloy so it could be blued.

I found that Midway has them, but they do not sell them internationally. I don't know why, because parts up to $500 (except main ones like receiver, barrel, etc., https://www.easyexport.net/firearm-expo ... ationally/ ) could be shipped to EU.

So looking for somebody else. Also, can anybody recommend exporter willing to purchase those parts and ship them outside USA.

As far as I know, following parts are required.

- Bisley grip frame
- Bisley hammer or hammer assembly
- Bisley trigger
- Screws holding grip frame onto frame from back side, next to hammer

Please correct me if I am wrong or omitted something.

Thanks


Top
 Profile  
 
PostPosted: Sat Sep 25, 2021 6:18 am 
Ruger Guru

Joined: Wed Sep 18, 2002 1:01 am
Posts: 37927
Location: Lake Lure NC USA
It wouldn't be factory parts,, but EXCELLENT grip frames & grips, including a few different shapes can be had from Ronnie Wells in Texas.
rwgripframes@gmail.com

Brass, steel, aluminum, and some seriously good feeling different designs.

_________________
Shoot straight and safe!

" A fine is a tax for doing wrong,
and a tax is a fine for doing
right! "
NRA Instructor
USPSA shooter
SASS shooter (Outlaw Joe Wales)
NRA Women On Target Instructor
NC Hunter Safety Instructor
Nuisance Wildlife Control
Scuba Instructor
Eagle Scout, BSA "When it mattered!"


Top
 Profile  
 
PostPosted: Sat Sep 25, 2021 10:50 am 
Hawkeye

Joined: Thu Jun 24, 2004 1:01 am
Posts: 10825
Location: Memphis, TN USA
Have you tried Brownell's?

Bob Wright


Top
 Profile  
 
PostPosted: Sat Sep 25, 2021 11:37 am 
Hawkeye

Joined: Wed Oct 24, 2007 3:17 pm
Posts: 20870
Location: Kentucky
Where would you want them shipped?

_________________
I^3


Top
 Profile  
 
PostPosted: Sat Sep 25, 2021 7:46 pm 
Bearcat

Joined: Thu Nov 22, 2007 11:11 am
Posts: 13
Location: MO
I got my kit from Brownells. I have not had a chance to install it yet, but it looks like it is complete.


Top
 Profile  
 
PostPosted: Sun Sep 26, 2021 5:35 am 
Buckeye

Joined: Sun Dec 17, 2000 2:01 am
Posts: 1165
Bob Wright wrote:
Have you tried Brownell's?

Bob Wright

I tried, but cannot open USA website. I was able to open Italian one, but just hammer, trigger and few springs, are 279,50 € (euros), or $328.8, grip frame not included, see https://www.brownells.it/epages/Italia. ... llFacets=1 . Bit too much!!!

Ale-8(1) wrote:
Where would you want them shipped?

To Croatia, now member of EU, if that makes any difference regarding shipping. I am aware that some companies would ship to some EU members, but wouldn't to others. I know as fact that shipping from Germany to Slovenia is one thing (and price), shipping to Croatia is much more complex and costly. Some companies asked as much as 250 € (euros), and that was for cap&ball Remington 1858. The difference is that Slovenia is within Schengen zone, Croatia not yet. However, I am in Zagreb, very close to Slovenian border, so number of shooters and hunters from here opted for delivery in Slovenia to their local stores.


Top
 Profile  
 
PostPosted: Sun Sep 26, 2021 5:39 am 
Buckeye

Joined: Sun Dec 17, 2000 2:01 am
Posts: 1165
saltydog wrote:
I got my kit from Brownells. I have not had a chance to install it yet, but it looks like it is complete.

I would appreciate if you could list what exactly is included in the kit, and what is total cost.


Top
 Profile  
 
PostPosted: Sun Sep 26, 2021 1:09 pm 
Buckeye

Joined: Sun Dec 17, 2000 2:01 am
Posts: 1165
contender wrote:
It wouldn't be factory parts,, but EXCELLENT grip frames & grips, including a few different shapes can be had from Ronnie Wells in Texas.
rwgripframes@gmail.com

Brass, steel, aluminum, and some seriously good feeling different designs.

Very nice products, but pricey; grip frame $350, and Bisley hammer &250. That grip "Bisley +4 Degree New Model" looks very interesting, however, just brass and aluminum, no steel https://rwgripframes-com.3dcartstores.com/Bisley+4DF .


Top
 Profile  
 
PostPosted: Sun Sep 26, 2021 8:22 pm 
Bearcat

Joined: Thu Nov 22, 2007 11:11 am
Posts: 13
Location: MO
Onty wrote:
saltydog wrote:
I got my kit from Brownells. I have not had a chance to install it yet, but it looks like it is complete.

I would appreciate if you could list what exactly is included in the kit, and what is total cost.


Sorry, I'm out of town for a couple of weeks and don't have access to the kit. I'll check it when I get back.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group