RugerForum.com

This is a Ruger Firearms enthusiast's forum, but it is in no way affiliated with, nor does it represent Sturm Ruger & Company Inc. of Southport, CT.
It is currently Sun Aug 18, 2019 1:47 pm

All times are UTC - 7 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Thu Jun 06, 2019 7:30 pm 
Single-Sixer

Joined: Thu Jul 22, 2010 2:50 pm
Posts: 143
Is this normal ? I have a P90 and under the slide on the long flat surface that scoops up a round from the magazine , there is a portion of one of it's corners that is cut at an angle on the left side. Not sure if this is normal or made this way . The area is right on the breech face under the firing pin hole. I attached 2 pictures. Any help is appreciated . Sorry , for some reason I cant attach the picture. The "cut out" portion is at the left hand area on the left hand edge when looking at the slide underneath.

_________________
Common sense is no longer common


Last edited by tercel89 on Fri Jun 07, 2019 5:29 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri Jun 07, 2019 5:28 am 
Single-Sixer

Joined: Thu Jul 22, 2010 2:50 pm
Posts: 143
Im not sure why I cant post pictures here but if someone could kindly post a picture of the underneath side of their P90 slide I would appreciate it. I'll be able to see if this is normal or not. Thanks .

_________________
Common sense is no longer common


Top
 Profile  
 
PostPosted: Fri Jun 07, 2019 8:52 pm 
Hunter
User avatar

Joined: Tue Sep 21, 2010 3:13 pm
Posts: 3087
No pic but it sounds like the cutout for the ejector. When the slide moves back it goes over the ejector. Clearance cutout.

If I understand what you are saying and I think I do.

More importantly, does the pistol work correctly?


Top
 Profile  
 
PostPosted: Sat Jun 08, 2019 8:37 am 
Single-Sixer

Joined: Thu Jul 22, 2010 2:50 pm
Posts: 143
roylt wrote:
No pic but it sounds like the cutout for the ejector. When the slide moves back it goes over the ejector. Clearance cutout.

If I understand what you are saying and I think I do.

More importantly, does the pistol work correctly?


It works great . The "cut out" part is opposite of the ejector. The P89's don't have it.

_________________
Common sense is no longer common


Top
 Profile  
 
PostPosted: Sat Jun 08, 2019 10:13 am 
Hunter
User avatar

Joined: Tue Sep 21, 2010 3:13 pm
Posts: 3087
https://www.gunbroker.com/item/817188313

Like this? I'm sure it is a clearance cut for the ejector. Not extractor.


Top
 Profile  
 
PostPosted: Mon Jul 08, 2019 9:52 am 
Single-Sixer
User avatar

Joined: Thu Jan 31, 2008 2:40 am
Posts: 478
Location: Foothills of the Gila Mountains, SW Arizona.
tercel89 wrote:
Is this normal ? I have a P90 and under the slide on the long flat surface that scoops up a round from the magazine , there is a portion of one of it's corners that is cut at an angle on the left side. Not sure if this is normal or made this way . The area is right on the breech face under the firing pin hole. I attached 2 pictures. Any help is appreciated . Sorry , for some reason I cant attach the picture. The "cut out" portion is at the left hand area on the left hand edge when looking at the slide underneath.

I'd say it is normal as it's there on both P345 slides I have.
Image
My guess is that it's there to prevent the slide from hanging up on the magazine.
Image
Regards,
Greg


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 7 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group