RugerForum.com

Well I Was Cleaning My New ec9s Today. And When I Oiled The Slide And Rails I Slid The Slide On The Frame. To Spread Out The Oil And Then I Heard The Click And Now The Slide Is On The Frame And The Barrel And Recoil Spring Are In The Box. And I've Tried Everything To Get The Slide Off The Frame. Then In The Manuel I Found A Line That Said . Do Not Install Slide On Frame Without Barrel And Recoil Spring Installed. So My Question Is: Is This A Return To Ruger Fix.??? Or Does Someone On Here Now How To Get The Slide Off ?? Thanks For Your Time.

Try this:

www.youtube.com/watch?v=jA_I4DPRlwA

_________________
I learned a long time ago that I can't change the world, but I can change one life at a time.
"Life happens now, and it can be lost in yesterday, or misspent waiting for tomorrow."
Let's just sit here awhile and see what happens...
NRA Benefactor
www.GeorgiaCarry.org

Thanks Cholo, I haven't run into the problem, but it led me to some other good videos.

_________________
NRA Life Member
USMC Life Member
“If violent crime is to be curbed, it is only the intended victim who can do it. The felon does not fear the police, and he fears neither judge nor jury. Therefore what he must be taught to fear is his victim.”
People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.
George Orwell

This is the second time someone has posted this issue.

Yeah, I was going to say just pull the trigger. That's the drill to release the slide on a number of modern semi-autos.

Thanks, Cholo I Tried The Video But It Did Not Work On The ec9s. Thanks For Your Time.

Note to self: DON'T DO THIS!!!

I'd say pull the trigger and give a good whop on the backside.... there's a chance it will let go.

If it does do the same to yourself.

_________________
Blume
CSIA #599 DCS

"Don't ever think the reason I'm peaceful
is because I don't know how to be violent."
"I'd rather Die while I'm Living than live while I'm Dead"... Jimmy Buffet

Well Guys I Found A Video On youtube That Shows How To Remove The Firing Pin And Spring From The Slide. And That Is What Was Catching. Problem Solved.. Thanks For Your Time And Help.

blume357, Thanks For Your Remark But I'm Not Working On A HIGHPOINT !!!!!!!!!