I put the first 150 rounds through mine on Friday. No FTF/FTE issues at all, and a sweet trigger pull on it. I ran 3 brands through it
(Freedom Munitions, American Eagle and Blazer Brass, all 115 grains). The one and only issue I had was that I dropped a mag before the first shot. I'm a lefty, so I thought I hit the mag release but I couldn't recreate it so I probably didn't have it fully seated.
As far as prep work before going to the range, I field stripped the slide and did a light polish on the feed rail to reduce drag. With the barrel and recoil spring out, I ran the action by hand about 30 times to make sure there were no hang ups. I wiped out excess oil, disassembled and cleaned the mags, hit the feed lips with a hard stone to get rid of sharp edges.
Compare to the Walthers we brought to the range (I brought my PPX, my wife brought her PPS M2)
I had one failure to feed on the PPX, wife had one light strike on the PPS. She loved the trigger on the Ruger, and was just as accurate on day 1 as she is with the Walther. I found that point of impact is a little higher than point of aim- about 2 inches at 7 yards- I'll need more time with it to dial it in.
I'm giving it a thumbs up.