Jan 31, 2015 #1 J johnp Bearcat Joined Feb 21, 2008 Messages 28 Location NC I was taking my LCP apart to give it a good cleaning and after pressing out the two plastic pins I noticed that one was broken about a good eight of an inch from the end. Is this something that Ruger will replace with just a phone call?
I was taking my LCP apart to give it a good cleaning and after pressing out the two plastic pins I noticed that one was broken about a good eight of an inch from the end. Is this something that Ruger will replace with just a phone call?
Jan 31, 2015 #2 L loaded round Hunter Joined Aug 3, 2003 Messages 2,264 Location Valley Forge, Pa You won't know unless you give them a try.
Jan 31, 2015 #3 G Gizmo42 Single-Sixer Joined Aug 15, 2008 Messages 284 If not, they are only $2 for a set of 2 pins. http://shopruger.com/LCP-Frame-Insert-Pin-Set-of-2/productinfo/61527/
If not, they are only $2 for a set of 2 pins. http://shopruger.com/LCP-Frame-Insert-Pin-Set-of-2/productinfo/61527/
What is your minimum comfort zone for brass stock?