P89DC FIRING PIN

Help Support Ruger Forum:

Rosie65

Bearcat
Joined
Jul 13, 2009
Messages
28
Location
Indiana
Can someone tell me how to change the firing pin on a P89DC? I know how to field strip but thats about it. Thanks in advance.
 

contender

Ruger Guru
Joined
Sep 18, 2002
Messages
25,142
Location
Lake Lure NC USA
While I've never done a P89DC, I have fooled with the P-85 a bit. However, if you can get a copy of the "Gun Digest Book of Firearms Assembly/Disassembly" Part I Automatic Pistols, it'll have a very detailed photo instruction on the P-85. That should pretty much help you replace the firing pin. If you need any parts, I have a bunch for the P-85 & P-89 too.
 

roylt

Hunter
Joined
Sep 21, 2010
Messages
3,100
It is real easy.
Pull the extractor.
Decock lever on that side comes out after you push in on the firing pin a little.
You may be able to take the pin out at that point if you can move the other decocker far enough out of the way.
Otherwise you have to remove the decock spring pin and spring to free up the decock lever.
Then the firing pin just falls out.

You can look at this too for some help but this is a safe model.
http://www.rugerforum.com/phpBB/viewtopic.php?p=1376159#1376159
 

Latest posts

Top