12ga,10ga,8ga,4ga FH; 585HE/700HE; Other Big Bores--

Help Support Ruger Forum:

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
A 585 HE ...shot with moderate heavy load......

https://scontent.cdninstagram.com/t50.2886-16/20404363_470558053312276_3772630570509533184_n.mp4


Here is a 375 HE target gun set up, by Asteroid Precision...

375hehotrod.jpg



Here is video of it being tested... And with a 350gr bullet about 3450-3475,

bolt opened easily with one finger...And he's just getting started

and is checking on better powder, Ed..



https://www.facebook.com/AsteroidPrecision/videos/298031133934093/?fref=gs&dti=321360231548869&hc_location=group
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Here is recap simple setup to get faster loads with 12ga sabots

& slugs, Example using break actions...., reaming chamber

in a 12ga break action to 3.5" with a 3.5" 12ga reamer, that isn't

something needing special order, and use 3.5" plastic cases , or

get 3.5" brass cases made. With mag shotgun primers and

our slower powder loads you can get a quarter more speed,

which gives 50% more energy...


585 Hubel Express video, 190ft/lbs recoil, heavy load, gun little light.....

https://www.youtube.com/watch?v=tyS9zZ8ElJA


Another view of Asteroid Precision's.... 375 HE target gun,

375hehotrod2.jpg



Here is our 416 HSM we are developing next to 416 Barrett, Ed

hsmbarrett.jpg
 
Joined
Jan 15, 2007
Messages
809
Location
Lake Norfork,Ar
I thought the weight for bore designated guns was the number of round balls per pound of bore size.
So an 8 bore gun would shoot a 2 ounce ball,4bore would be a 4 ounce ball,and a 2 bore would be an 8 ounce ball,or half a pound!!
Would that be right?
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
A full 2 bore ball be 3500gr, in practice they used lighter

hollowbased type or paradox slugs maybe 2500 gr.

Here in picture of the cases, are shown the steps in making

our 416 HSM case, from BMG brass,, Ed

416process.jpg



We might have a company that is doing a bolt gun with an action

between BMG size and longer rifle actions used for 375 HE,

375 Lethal, and Cheytacs.. To use for our 416 HSM without

having to do extreme rebating of the rim.


Here is picture of 620 416 hsm cases half done. Done on cnc ,

that slimmed them down, cut new rim and extractor groove.

There are over 500 more at cnc getting done now, plus we have

1000s more bmg cases we make them from, when needed..

This case is public domain and if anyone wants to make

them we can give the steps involved...Ed.

hsmcnc.jpg
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
For big long cases our testing is showing that the 416 easier to get powders to work with, less problems ..
Maybe building a target gun,don't have 375 barrel all ready, maybe go 416....

We got cases, 416 HE and 416 HSM, as well as 375...
CEB and others will have bullets...CEB will be doing .416 in 450gr, 475gr, 500gr, 525gr and 550gr

Got sent 5 thick sided sample cases, same OD base as 585/375.416 cases, same belt, just .180" longer,
did a 416 HE, chambered extra barrel , cases stick over 50k. They have about .042" total taper, .021" per
side, when I necked couple to 416. That is a lot of taper , twice the taper of my 416HE...hanging up at 50k..

I could maybe go to 65k with these if we made taper with ..012" - .016" more taper to each side, but that is
no way to build target cases. I'd have to crunch down case shoulder diameter. And would look like 30-30.

And crazy part is, the case has enough brass material to thin up sides and stretch them way out to 4 or
more inches,, They weigh 150 gr more than our 585/375/416,, but with real thick sides they actually
hold less than our 416 HE with thin sides, that is .180" shorter...Our case does 65k ok without sticking..

And we can make super long 4" cases work if we had means to get them built, as we have
15 powders slower than HBMG.Here is pic of thin and thick sided cases, sectioned for comparison.Ed..


thickthin.jpg
 

UmpquaCharlie

Buckeye
Joined
Mar 23, 2008
Messages
1,384
Location
SW Oregon
Wow! I thought my work creating a poor mans twelve bore was intense. Seven grams of black FFg in my 12 bore cases was absolutely brutal.
Love these articles as my loads looked like they were for pikers.
Thanks for the writeup.
Dr Charlie
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Here is a drawing depicting the layout of thick and thin sided cases,
like my 585/375/416 HE thin sided ones and the thick one in picture.

And my 585 case is not perfect, as where it transitions from the
heavier corner to the side it isn't gradual, so case separates there
shortening case life. There are others made that way including brand X.
The dotted line is what it should be............

casedrawing.jpg


Others have sent cases to section and look at, that are built thick sided and they
stick also for the folks, If a longer case with about 5 sq in of side surface sticks and
don't spring back, the coefficient of friction is about .01 then the pull needed to move
it is 2500-3500 lbs..That is for big cases with normal amount of slant to the sides.

Here is picture of six nyati and gibbs size cases sectioned.. the5th one is present 585 HE
and 6th is thick sided version. 1st 600 OK which essentially nyati basic case left straight, belt added

allnyati.jpg


In the picture the nyati gma is one we built most of our first 585s on. Before we had factory run.
Reworking made it in size that is my 585 HE, but that brass had the sides of perfect thickness,
not too thick, but thin without sharp transition my new factory 585s had, they last forever as 585s......

Fourth one is an older nyati case I used to make about 10 of my 585s from,had thin sides, heavy corner
and sharp transition from the corner, tested 20 years ago, and they would separate after 4-6 hot loads
as 585s, my factory 585 with right powders, as a 585 will get 10 hot loads, and necked down to
416/375 4- 6 hot loads, right powders used, Moderate 577 equivalent, factory 585 at least 20 loads..Ed.
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Guy sent thick sided 375 case, next size base diameter up from Nyati.He said,
'Yes I ran them in a ___________ rifle built by ____, the best I
could get was 44000 psi, any more and they were stuck''

Big bore guys. other forums over the years related that trex/african case in 585
size, thick sided cases, stuck when they loaded them over 45k psi.

Another just sent us, thick sided 375, long case, same base OD as our 585 HE,
416 HE, 375 HE, and Mitch's 375 Lethal, and the thick ones stuck over 45k psi.

Now you can fill those cases up, with ultra slow enough powder so they won't
stick, but powder is too slow for max speed. Might get a little more
speed, with thick sides case, but case got to be 4- 4.5 inches long..

. Anyone needing a sectioned case of the ones I made the first of my 585s from,
contact me, if they want to get a general idea of what case side thickness should
be, in Gibbs size cases on up to about trex and 375 VM size case diameter.

Here is pic of our 585 based case next to brand X and thick ones, both have
same sharp, thinner, corner, where transition from heavy angled corner, to the
side, the carbide draw rod could easily be reshaped with diamond wheel,
just by grinding off sharp transition corner. Then sides would be perfect.., .

brandxthick.jpg



Here is picture of 416 HE in a Choate target/varmint stock guy is doing,
using long action BSA U9 action.Setting in stock ready to do bedding..Ed

choate416he.jpg
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Here is picture of thick 375 case sent to me, with thick sided trex case, and our HE case,
The thick 375 case is .050" bigger OD base, but inside is no bigger than HE cases..
These thick sided 375s stuck for the guy using them, when loaded over 44,000 psi....

brandv.jpg


Got guys asking and doing it, to do 416 HSM case for BMG actions, so leaving rim same,
as the original bmg rim, so will neck them, fire form to the longer shoulder, like the others.
Base a little bigger, Shoulder same diameter, same 30 degree slant, neck will be same..

Inside of case still has close to same shape, volumne within 3 % as ones we slimmed down more.
Some want to use bmg actions and can't wait for intermediate actions, or already have bmg action.
And they are really getting interested in the complete line of 416 CEB bullets now being done
clear up to 550 gr...

So there will be 3 versions, one for actions .750" bolt, one for .800-.850" bolt,
And one for bigger bmg bolts. The ones for BMG called 416 HSM2 ..

Here is 416 HSM guy working in a Montana PH, in a heavy thumbhole target stock. Ed


mrcphhsm.jpg
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Here is sectioned 585 HE case in the middle, we first made from

another case, years ago before we had factory run of brass and

it had perfect thickness on the sides and inside corrner.

We could fire them many times without sides thinning..

First case is factory run of our 585 HE, 3rd is case that is too

thick of sides and sticks at high pressures..

goodone.jpg


Pic of our factory run cases necked down to 375 and fired 4 times

at high pressure on the right, with unfired case on the left.

Our case is not perfect but does work...Ed

he4times.jpg
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
About 416 cal bullets............

The heaviest 550 gr for Extreme ELR probably be best 8 to 1 twist , in 416 caliber bullet,
and 520 gr 9.5 to 1, and 470gr 10 to one, Some barrels I picked up are 10 to 1.......

Now a novel idea is to lighten rear of bullet with small shallow hole drilled in base, might do better
long range.which would allow 10 to one barrel stabilize the heavier 550 gr bullets for ELR.
Making bullet nose heavier makes it more stable in flight, needing less spin,
like our hollow base 585 cal minie bullets only need 48 to 1 twist, or less
while out regular 585 bullets need about 24 to 1 to stabilise them..............

The winner of the King Of 2 Mile shoot last week was using 416 Barrett with a 1 to 10
twist, with a 500 gr CEB Lazer bullet, ...Robert Brantley, with Manners Stocks....

Paul Philips was third with a 416...

GOOD NEWS-- There is now an importer and seller of our 585 HE brass getting set up here,
in US, hopefully will be in stock, few weeks........ http://bertrambrass.com .. .. Caleb Hallet..

Have got another intermediate size action besides the Montana PH our guys working on,
to do speed testingwith. It is big long REM style action that can take our 416 HSM, ED
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Experimental intermediate size action with the Montana PH, for comparison.

It is an experimental action for our 416 HSM, to do our speed testing with

and get a better action than Cheytac size actions, for bigger case ELR use,

without going all way up to more expensive, huge actions.

It is big long round style action that can take our 416 HSM, almost

1.6" diameter action and .800" bolt, with locking lugs nearly as big as most

BMG actions.... ED


intermediates.jpg
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Here is picture of the bolt from the experimental action,

with our 416 HSM case in it. Note the amount of the

base size of locking lugs, the amount of area on the bolt..


interboltp.jpg



Here is link to guy doing special 585 HE in the EU,

Good pictures............www.585he.cz

We tested intermediate action with a 700HE barrel we had here.

Just temporary to test strength. 1000 gr over 3100..

Action worked fine.. Ed.
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Here is video of early water barrel test of the

12ga From Hell, from years ago.

https://www.youtube.com/watch?v=c48zTpsgbuk


Here is picture from that video..

Shot%203.jpg




Here is the intermediate size action for 416 HSM with test barrel, .Ed

intertargetp.jpg
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
In 416 HSM got a 415 gr long target bullet 3800,

with plain barrel, no brake, on intermediate action,

Our 416 HE gets same 415gr bullet to 3300.Ed
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Here is picture of our 416HSM cases with screw in shellholders,

for Ammomaster, etc, and slip in shellholders for regular presses

Also have some for big LEE Classic and Smart Reloader presses..

A 378 WEA MAG in picture for comparison...


Second is stacks of 416 HSM, about a third fireformed

and the rest to be fireformed... So far total about 1700, Ed



hsmholders.jpg




workinghsm.jpg
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Bob Snapp, 90, the great Gun Craftsman, of

Clare, Michigan, passed away Jan 28th....

He was an esteemed member of the

American Custom Gunmakers Guild,

Being its president in 1992..He liked

working with Martini Cadet singleshot rifles

.Worked with guys testing armor long time ago.

Maybe the 1st to do 20mm necked down to 50cal

We lost a great friend,,,Ed
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
.....


It is possible rig up holders for many types setups.,

About shellholder supply for big cases,

RCBS and others make slip in holders for shotgun cases

that can work or reworked for big rimmed rifle cases...

Here are various sizes.......

16ga-- .810" rim,........ 20ga-- .760" rim,....

24ga-- .725" rim,....... 28ga .680" rim....

Ch4d and Buffalo Arms also have these larger shellholders...


We fireform the 416 HSM with 65 gr of medium speed

surplus powder, with rest of case filled with farina

and grits mix, with a play dough plug in the neck.

It is loud, so we shoot it into big container through a barrel size

size hole, so the sound is muffled, so it doesn't deafen us..


It is great getting more companies making 416 caliber bullets,

long target and bore rider bullets. Ed..



....
 

hubel458

Single-Sixer
Joined
Jan 13, 2009
Messages
119
Location
Brinton, MI
Wonder if a PTRD with 5 ft long barrel is stable enough

for ELR , rebarrel to 416 and use our 416 HSM, 500 gr bullet ....

.Here is up north guy using 585 HE in a PTRD with inserts,

Light load.....Inserts are in the shape of the 14.5mm case....


https://www.youtube.com/watch?v=jyabm-cbwgc&feature=youtu.be


HERE ia video, 585 Hubel Express and water jugs - slow motion

750 gr with 155gr RE17, just a moderate load.....Ed


https://www.youtube.com/watch?v=uXAo1mJqw8Y
 
Top